A truck is not a product that you should ignore when it comes to cleaning. The components of a skateboard truck must be cleaned and maintained on a regular basis.
Cleaning the parts will help ensure the long-term viability of these goods. Although this article is primarily about washing longboard trucks, you may also learn something if you have skateboard trucks.
Process Clean Skateboard Trucks
The process of cleaning these two trucks is essentially the same. A washed skateboard truck is required since it will urge you to go for rides. How to clean skateboard trucks is next on the agenda.
The following tools will also be required:
- A screwdriver (#2 Phillips bit recommended)
- Slip-joint pliers
- WD-40
- Paper towel
Procedure:
STEP 1: The skateboard truck is connected to the skateboard deck by means of a few nuts and bolts. To remove this first, use the screwdriver and slip-joint pliers.
Remove every nut somewhat so that you may complete the job by hand. Loosen the nuts completely and remove them from the bolts.
Many people are going to throw nuts in an area that will be difficult to reach later. As a result, store nuts in a safe and familiar place. It will be simple to remember during reassembly.
STEP 2: You should be finished removing nuts and selecting a suitable shelter for them at this point. It’s now time to separate the deck from the truck.
To remove the truck successfully, use your hands. Do not pull with a great deal of force. Also, make sure the kingpin is facing outward.
STEP 3: This is something that not all skateboard trucks have. You must also remove any risers from your pair of trucks at this stage if you own them. There is no such thing as a skateboard truck with a riser.
STEP 4: It will take you around an hour to clean. Cleaning everything from trucks is a must, especially the baseplate. The first step is to remove the kingpin nut. Next, remove the hanger from the baseplate. Finally, take out all of the bushings.
STEP 5: Examine these components. Look for a fracture. If one of these items is broken or cracked, it must be replaced first.
If all of your parts appear to be in good working order, apply a small amount of the WD-40 on a paper towel and clean off debris and grime from them all. Because of the excessive dirt, your trucks make high-pitched squeals during rides.
STEP 6: You must clean the axles once more. The axle is the dirtiest of all the components.
Take another paper towel. Wipe away the rest of the dirt from the axles. From bearings, the axle picks up a lot of dust. As a result, double-check that they are in good working order.
STEP 7: Follow the same technique on the remaining vehicle. You’ll be ready to begin putting the trucks back together after that. Keep in mind that tightened Nuts and bolts are required.
It’s not good to over-tighten or under-tighten the bolts. The kingpin must also be facing outward after the attachment is completed.
This technique will not only save you money, but it will also help your board maintain the optimal angle for riding. Just remember that if you use this method, you’ll need to replace your traction pads and bushings after a year or two. This is why we recommend replacing them at least every two years for maximum longevity.
Conclusion
It takes merely a short time to clean the trucks, but it has a significant impact on making your skating experience incredibly smooth and pleasing. Cleaning the trucks solves many issues you find on the skateboard. It is because these components are part and parcel of the board. Hence, do not forget to clean them every time you feel the need. Hopefully, the article will assist you in how to clean skateboard trucks.